Glass release agent manufacturer, glass mould agent supplier, glass release agent use method, glass mold release agent use.
Glass release agent
Scope of application: glass mold release agents, resistance to high temperature of 1200 ° C, the lubrication performance is superior, water-based, non-toxic, non-polluting, high environmental protection, has excellent film-forming adhesion force, and with molten metal (such as aluminum, copper, steel, etc.) or glass does not have any reaction, paddle retains lubrication at high temperature, mold, oxidation resistance, resistance to sticky special effects. Spray this product can make contact with the die surface to prevent corrosion, increase the service life of the mold. Its unique lubricity, not sticky and much higher than the similar products, can make the transparent after molding, products, bright and clean, more upscale, especially applied to the high difficulty of deep bend, special-shaped, hot melt, clear light, such as bending glass processing, its effect is significant.
The product details >>>.
Now glass mold release agent for water-based commonly, non-toxic, non-polluting, high environmental protection. Extend the die life, effectively reduce the loss of the mold, and reduced the time needed for clean up mold, glass processing process, can make glass products minimizes the surface defects, let the glass easier to mold release. Good operability: special spray formula can be evenly coated on the surface of the mold using manual method. High temperature resistant, excellent thermal shock ability, even when the temperature is 1200 ℃ heating, cooling rapidly back and forth repeatedly still won't be broken, even if heated to 1500 ℃ can still be at ease use. Quick drying speed: special quick drying formula, quick drying speed, higher production efficiency and lower cost.
Our existing glass mold release agent is:
Glass mold release DLJ10: my company production of fine DLJ10 in a special polymer made, this product has good stability, easy to use, stripping efficiency, non-toxic, no corrosion, no pollution, no fire hazard, can be used many times diluted water after use, can quickly form a thin film on the mold, product release excellent results. And can provide high gloss and good anti-fouling, can effectively extend the service life of the die, after using water can remove the film without residual. It is specially designed for all kinds of glass and steel products. Please make sure to remove the oil stains on the surface of the mould and the old mold cleaning agent, and remove the mold surface.