[performance characteristics].
DY - V4011 plus molding electronic potting glue is a kind of two-component using platinum catalyst addition reaction of crosslinking curing at room temperature vulcanized silicone rubber, insulation, moistureproof, high and low temperature resistance, dimension stability, ageing resistance, etc.
[technical indicators].
A group B component.
Appearance: colorless transparent liquid colorless transparent liquid.
Active ingredient: 100% 100%.
Viscosity (mPa.S) : 1000 ~ 1500 ~ 1000.
Curing time at room temperature (hour) : greater than or equal to 1.
[usage]
1. Electronic potting glue.
2. It can be diluted with solvent and can be separated into the MQ silicone resin and used as adhesive coating. They can also be emulsified and used in the form of latex for environmental protection.
3. After diluting with solvent, it can be separated or mixed into the MQ silicone resin and used as a durable demodulator, which can also be emulsified and used for the same purpose in the form of emulsion for environmental protection.
4. Other untried and undeveloped applications.
[usage and dosage].
When used for pouring sealant, after mixing it with 1:1 ratio, it will be shaken and defoamed on the surface of mold cavity or part, and then it will be cured. It usually takes about 1 hour, heating can accelerate the curing speed. When used for moulding or anti-sticking agents, it is generally diluted or emulsified into 5 ~ 10% concentration, applied to the surface of the object, and then heated and cured.
[precautions].
We described and presentation method and dosage is a common situation, but we can't control the working conditions of the user and the environment, the user should be used by pioneer experiment to determine their own best method and dosage.
[packaging storage and transportation].
Sealed at room temperature for 12 months with 50KG and 200KG plastic drums.