Products name said

[main features]
The cream is suitable for the defoaming of calcium chloride drilling mud.
[usage]
Dilute with water to low concentration, add to the mud system, the amount of effective composition of the total system of 10-200ppm.
[attention to problems in development]
Dilute with water before use, add water with a small amount of water, stir and increase the dispersion speed. Kd-m1011-05 (low concentration) can also be used instead of kd-m101.

[main features]
The main component of the well defoaming agent is usually 10-10000cs.
[usage]
It is used to make a defoaming wax stick with microcrystalline wax and petroleum sulfonate or amines surfactant, which accounts for 50% of the total composition.
[attention to problems in development]
The negative charge foam is combined with an amine surfactant, and the positive charge foam is combined with sodium sulfonate.

[main features]
The silicone compound with a viscosity of 200-300cp is characterized by a strong anti-foam and anti-bubble effect.
[usage]
In the oil system, the dosage is 0.1%-0.5%, which can be used for quantitative use before the dilution of kerosene or other mineral oil with 10 times or 100 times.
[attention to problems in development]
It is only suitable for oil phase system and is limited in high viscosity mineral oil.